Wheeled Duct Rodder with the pulling rod diameter varying from 11mm to 16mm, Helps Cable & Wire Placing in Ducts
Wheeled duct rodder performs apparent advantage over portable duct rodder when the conduit or pipe is very long or complicated. Wheeled duct rodder is made with a rubber wheel on the cage, which makes it easier to transport at the job site. The wheel can be made into pneumatic or solid rubber tire with iron wheel rim. Different from portable duct rodder, wheeled duct rodder is often manufactured with the pulling rod diameter varying from 11mm to 16mm.
Duct rodder with outboard wheels
Duct rodder with outboard wheels is commonly used for threading in conduits. Two wheels on the duct rodder are installed on one side, outside against the end of bottom frame. The outboard wheels are designed for reducing the pressure on the ground. When moving the duct rodder to the job site, press down hard on the grip of the frame, towards the direction of the wheel, and move on the wheels.
Pneumatic tire and solid tire comparison
There are usually two kinds of tires of the duct rodder, including pneumatic tire and solid tire. Each has its advantage and disadvantage. There is a list below for comparison of the two kinds of tires.
| Type | Description |
| Pneumatic tire | Advantage | It weighs light and is full of elasticity. |
| Disadvantage | It is easy to be broken by the bad environment on the construction site. |
| Solid tire | Advantage | It is sturdy and good at running on the complicated conditions. |
| Disadvantage | It weighs a little bit heavy. |
Duct rodder with inboard wheels
Duct rodder with inboard wheels is specially designed for saving storage space. Two wheels are installed on one side, inside against the bottom frame. The usage of duct rodder with inboard wheels is the same as duct rodder with outboard wheels.
Features:
Feed device allows rod to feed out or be back with easy push or pull of rod
Anticorrosion,good elasticity,long working life
lexible rod: Optimal for cable/wire installation in conduits and underground ducting
Solid fiberglass, non-conductive
The external rod is protected from abrasion by a polymer coating.
Rod housed in a study metal frame with an integral brake. Simply rotate the wheel to guide the rod down the duct.
Permanently etched meters incremental markings allow for easy measuring
Application
Used to install pulling ropes and winch ropes into ducts,ready for cable pulling operations
Inside and outside conduit drops
Used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put
Specification
| Item | Rod diameter | Bend radius | Rod length | Conduit diameter | Frame size |
| WDR - 11 | 11 mm | 390 mm | 150 m - 300 m | 7.6 cm - 15 cm | 120 cm × 126 cm × 40 cm; 100 cm × 120 cm × 45 cm |
| WDR - 12 | 12 mm | 450 mm | 150 m - 300 m | 7.6 cm - 16 cm | 120 cm × 126 cm × 40 cm; 120 cm × 130 cm × 45 cm |
| WDR - 13 | 13 mm | 500 mm | 150 m - 300 m | 7.6 cm - 17 cm | 130 cm × 136 cm × 55 cm |
| WDR - 14 | 14 mm | 550 mm | 150 m - 300 m | 7.6 mm - 19 cm | 130 cm × 136 cm × 55 cm |
| WDR - 15 | 15 mm | 600 mm | 150 m - 500 m | 7.6 cm - 20 cm | 150 cm × 160 cm × 55 cm |
| WDR - 16 | 16 mm | 650 mm | 150 m - 500 m | 10 cm＋ | 150 cm × 160 cm × 55 cm |
Note: other sizes can be ordered as customers' demand.
Product Tags:
|
|
Wheeled Duct Rodder Fiber Optic Cable Accessories With Pulling Rod Diameter 11- 16mm Images
|
